Mapping Out Your Gallery Wall

Memorial Day marks the unofficial start of summer and Labor Day marks the unofficial end (despite the fact that temps here reached 100 today). So, even though summer’s not really over yet, we are all diving head first into fall. Out of the heat, into the fall layers, kids are getting back to school, and our fall projects are lining up.

Gallery Wall 012Gallery Wall 0

For me, things will start to settle down a little bit as every night and weekend won’t be jammed packed with running around (whether for me or for clients), and I should be able to get some projects done around my own house!I need to put the finishing touches on the bedroom still and then take some pictures of that space to share with you all here and I can think of about a dozen other things I’d like to do around the house as well.

The first thing on my list, and something with probably the largest impact is to finish hanging our gallery wall. These pictures are from early Spring of this year when I had one of my friends over to take some pictures for the blog to not only map out my own gallery wall, but to document the process to share with all of you as well. About six weeks after these pictures were taken, we had a few friends over for brunch, and as I had been so busy, I hadn’t made time to get the gallery wall hung at that time. The morning before we were meeting with them, I broke out my notes from this planning session and started to try and get the gallery wall up on the wall. I was able to hang one painting before we needed to head out to meet our friends and I’m ashamed to say that that one painting is still the only one up on the wall.

But then, that’s life, right?! So now I want to share with you the process of mapping out your very own gallery wall, and how I mapped out mine, and then hopefully in a week (or so…) I will be able to share more pictures of my gallery wall completed!!

The process:

  1. First things first, you need to know the size of the space you intend to display your art on, so break out your tape measure and get to measuring. note the width (more important for now), and we will come back to the height later.
  2. Once you know how wide your space is, use your tape measure, some blue painter’s tape and your trusty assistant to mark out the width of your gallery on the floor.
  3. Get all of your frames and pieces of art together in one place so you can see what you have to work with.
  4. Once you have a good visual, start laying the larger pieces into your mapped out space.
  5. Build out from the larger pieces with smaller pieces, keeping in mind your spacing. Each area should use the same spacing so that the pieces group well and look balanced even when using different sized pieces and different styled frames.
  6. Swap out pieces to find the arrangement that you like the best and then take pictures so you can remember what it looks like in case you put it off for 6 months.
  7. Measure the overall height and width of your gallery wall. The center of the overall height of the gallery should sit at 57″ from the floor, placing the gallery at a good viewing level for yourself and your guests.
  8. Measure the spacing between your groupings as well as the spacing from the edges of the tape (your available hanging space) to the edges of the outermost pieces.
  9. Lastly, measure from the overall top of your gallery wall to the top of your central piece or your largest pieces and the overall edge of your gallery wall to the edge of your central piece(s), as you will hang these pieces first.

Once you have your gallery all mapped out, and your measurements determined and noted, you can clean up your mess on the floor and then start mapping out your hanging on the wall. Depending on your overall height of your gallery wall (x) and the measurement you got from the top or bottom to the center of this piece (y), you can determine where the screw will need to go. (x/2) will sit at 57″ from the ground. So if your gallery wall is 40″ tall, then it will span from 37″-77″ in height. Again, I like to break out my handy blue painter’s tape and mark the top and bottom of my gallery wall off so that I can use them as a reference while I’m working through hanging the pieces without having to measure it over and over again.

To begin hanging, I always start with the largest piece that sits most centrally located in the wall, or in my case, I have two large pieces balanced out with several smaller pieces, so I started with the largest piece on the left. Using hanging wire to support the pictures, pull the wire on the back to where it would sit if it were hanging on the wall, and measure from the top of the frame to that point (a). Add this measurement to the measurement that you got from number 9 and jot this down. this is the distance from the top of the gallery wall space to the height you will put the screw in at.

Next you need to use the overall width of your gallery wall, and the width from the edge (again, noted in 9), measure from the edge of the picture to the center (where the screw will go), add these two together and you will have the position of your first screw.

It sounds like a lot of steps, but once you have your first piece hung, you will build out the wall from there. You have all of your spacing measured and noted from mapping out your gallery wall on the floor, so you can easily fill in the wall with the rest of your frames until it is complete!

Is your head spinning yet?? What projects do you have planned out for the fall? Hopefully I can get this project wrapped up soon, with lots of images to document the process so I can share more with you soon.

Images By Lindsay Perry, click to expand.

Motivation Monday: A Labor of Love

IMG_3613

For me, design is about more than just work. It’s more than just a paycheck. It is about doing what I love. On this Labor Day, it is important to take a step back and remember why we do what we do. Do we do it for the paycheck? Do we do it to support our family? Do we do it because it’s what we love to do? Is it all of the above?

For me, I’m so fortunate to answer that it is all of the above. But whatever your answer, I hope you are taking time to enjoy this long weekend with friends and family before you have to get back to work tomorrow.

Happy Labor Day!

Deadline City

Labor Day weekend is fast approaching, and aside from the holidays, it is one of the busiest times of year for design pros. Many people want to wrap things up by this weekend for a variety of reasons: from hosting an end-of-summer bash, to getting things finished before school starts back up, to coming home from their vacations and wanting to arrive to a finished space!

Whatever the reason behind it, designers this week are slammed! I like to think that I’m a bit more composed than a headless chicken, but when all is said and done, you can find me enjoying at least one day off with a cocktail in my hand and hopefully some sand beneath my feet. I’m coming for you Labor Day!!

Probably the biggest thing I have going right now is one of my clients will be hosting all of the festivities surrounding their niece’s wedding. After purchasing a new house, almost every room has a project that needs to be completed. We have been focusing on taking care of the rooms that are completely empty or will be high-traffic areas before we work on the spaces that are outdated and just need a change.

We have all been running around from Philly to New York and all corners of the internet to find materials, make selections and get things ordered. The thing is, despite ordering in advance and selecting “overnight” shipping options, we are still waiting for a few key pieces. Friday morning, I will be bustling around their home getting window treatments hung and placing furnishings that might only be placeholders just to fill the space before the parties begin.

I will take some pictures if I have time and share next week what the house looks like in it’s temporary state of completion, place-holders included. And then you can really see the transition of the space coming together. For now, all of the pictures included here are of the space as it was when I first came to see it before starting work on the space.

The one space I’m missing is their son’s bedroom, which I’m kicking myself for not taking a photo of, since even though we are doing very little with his space, the changes we are making will likely have a HUGE impact.

Anyway.. that’s what I’m up to! What are your Labor Day plans?